Detectasmoke puts both photoelectrical and ionisation smoke detectors through their paces to ensure their circuits and alarm systems are working and that are actively sampling the air for any hint of fire.

• Simple to use
• Non - Flammable
• Ozone Friendly
• Non Toxic
• Non Corrosive
• Tests Optical + Ionisation Smoke Alarms
• Compatible with Pole Delivery Systems
• Competitively Priced

Our unique formulation of aerosol particles simulates the entire range of fire conditions, giving you the confidence of knowing your fire alarm system will respond promptly to any kind of fire condition.

Testing by the application of a recommended aerosol, designed to safely simulate smoke particles is now the most widely used professional method approved by detector manufacturer worldwide.

BS 5839 1:2002 45.4 (d)

"Point smoke detectors should be functionally tested by a method that confirms smoke can enter the detector chamber and produce a fire alarm signal (e.g. by the use of apparatus that generates simulates smoke or suitable aerosols around the detector). It should be ensured that the material used  does not cause damage to, or affect the subsequent performance of the detector..."

Source NFPA 72E, 8-2.4.1.1

"Detectors shall be tested in place to ensure smoke entry into the sensing chamber and an alarm response..."

Contents

• 1 x 250ml Aerosol Sufficient for testing 300+ alarms
  

Pack Size

•  Single Can 250ml
• 12 Cans (Inner)
• 48 Cans (Outer)
• 1296 Cans (Pallet) 

£14.95
USD: 22.36
EURO: 16.49